LSI 20160 - Manual (Page 25)

Detailed Installation Procedure 2-7
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
2.2.4.1 Making Internal SCSI Bus Connections
This section provides step-by-step instructions for making internal SCSI
bus connections. If you only have external connections, skip to
Section 2.2.4.3, “Making External SCSI Bus Connections.”
Step 1. Plug a 68-pin connector on the end of the internal SCSI ribbon
cable into connector J4.
Figure 2.4 illustrates how to make this
connection.
Figure 2.4 Internal SCSI Ribbon Cable to Host Adapter