LSI 20160 - Manual (Page 19)

LSI20160 Single Channel Ultra160 SCSI to PCI Host Adapter 2-1
Copyright © 2001 by LSI Logic Corporation. All rights reserved.
Chapter 2
Installing the LSI20160
This chapter provides instructions on how to install the LSI20160 and
includes these topics:
•
Section 2.1, “Quick Installation Procedure,” page 2-1
•
Section 2.2, “Detailed Installation Procedure,” page 2-2
•
Section 2.3, “Completing the Installation,” page 2-20
2.1 Quick Installation Procedure
This section provides an overview of the installation procedure. If you are
an experienced computer user with prior host adapter installation and
SCSI bus setup experience, this section may sufficiently describe the
procedure for you. If you prefer more detailed guidance for installing the
LSI20160, proceed to
Section 2.2, “Detailed Installation Procedure.”
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before handling the host adapter board.
Step 2. Remove the LSI20160 from its packing and examine it for any
damage.
Figure 2.1 shows an example of this host adapter board.
Step 3. Switch off and unplug the system.
Step 4. Open your PC cabinet.
Step 5. Locate the PCI slots on your computer.
Step 6. Insert the LSI20160 into the selected PCI slot.
Step 7. Connect the internal and external SCSI peripherals.