Lochinvar Hot Water Generator - Manual (Page 6)

2
Installation
6
Hot Water Generator Installation and Operation Manual
Transporting and unpacking the unit
Each Lochinvar Hot Water Generator is crated as necessary at the factory. The crating is designed to provide protection for the
unit during transportation, and to provide a safe means by which to lift and move the unit with a fork lift or hand truck.
In order to prevent damage during shipment the controls package is disassembled at the factory after leak testing. Reassembly
will require re-attaching the unions (or bolting flange) to the appropriate locations and insertion of the control valve bulb into
the provided bulbwell and the system is ready for operation (see FIG.’s 5 and 6 below).
All hardware for the reassembly is included with the system. Drawings of the specific controls package are included with each
product illustrating the finished assembly. For water to water systems the bypass piping union may remain attached for
shipment. See FIG.’s 5 and 6 below for a detailed explanation of the break points.
Figure 5_Steam to Water Storage Heater
Figure 6_Water to Water Storage Heater