Wireless > wireless security, Advanced configuration, Wireless security – Linksys WAG160N User Manual
Page 15

Chapter4
Advanced Configuration
Wreless-N ADSL2+ Gateway
Configure your wireless network by adding your Wi-Fi
Protected Setup-supported devices one at a time, using
the appropriate method listed below:
The devce has a W-F Protected Setup button
Press
the Wi-Fi Protected Setup button, then click the Wi-Fi
Protected Setup button on the screen. Searching... is
displayed while the Gateway searches for your device.
The devce has a W-F Protected Setup PIN
number
Enter the PIN number in the field provided
on the screen.
The devce asks for the Gateway’s PIN number
Enter
the PIN number displayed on the screen.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless Security
The Wireless Security screen configures the security of
your wireless network(s). The supported wireless security
modes are WPA2-Personal, WPA-Personal, WPA2-Mixed,
WPA2-Enterprise, WPA-Enterprise, RADIUS, and WEP. WPA
(Wi-Fi Protected Access), is a security standard stronger
than WEP (Wired Equivalent Privacy) encryption. WPA2
is a more advanced, more secure version of WPA. WPA-
Enterprise, WPA2-Enterprise, and RADIUS use a RADIUS
(Remote Authentication Dial-In User Service) server for
authentication. For detailed instructions on configuring
wireless security on the Gateway, refer to “Chapter 2:
Wireless Security”.
Wireless Security
Securty Mode
Select the security method for your
wireless network. Proceed to the appropriate instructions.
If you do not want to use wireless security, keep the
default, Dsabled.
NOTE:
If you use wireless security, remember
that each device in your wireless network MUST
use the same security method and settings, or
else the wireless devices cannot communicate.
WPA2-Personal (Recommended)
Security Mode > WPA2-Personal
•
•
•
Encrypton
The method is TKIP or AES.
Pre-Shared Key
Enter a key of 8 to 63 characters.
Key Renewal
Enter how often the Gateway should
change encryption keys. The default is 3600 seconds.
WPA-Personal (WPA2-Personal recommended)
Security Mode > WPA-Personal
Encrypton
The method is TKIP or AES.
Pre-Shared Key
Enter a key of 8 to 63 characters.
Key Renewal
Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is 3600 seconds.
WPA2-Mixed
This option allows clients to use EITHER WPA-Personal OR
WPA2-Personal.
Security Mode > WPA2-Mixed
Encrypton
The method is TKIP or AES.
Pre-Shared Key
Enter a key of 8 to 63 characters.
Key Renewal
Enter a Key Renewal period, which instructs
the Gateway how often it should change the encryption
keys. The default is 3600 seconds.
WPA2-Enterprise
WPA2-Enterprise features WPA2 used with a RADIUS
server. (This method should only be used when the device
is connected to a RADIUS server.)