LG CodePlus MUX/MOD Feature Card HCS6320 - Manual (Page 40)

40 206-4183
View Hardware Information for the Selected Transcoder
At the
[HCS7720 (#)] Command > prompt, type hwid and press Enter to view the selected
card’s hardware ID (firmware version), for example:
Card HWID# is: 7720-v1.1-2011-1026
View Software Information for the Selected Transcoder
At the
[HCS7720 (#)] Command > prompt, type ver and press Enter to view the selected
card’s software versions, for example:
OS version: HCS7720-943-2011-1025
Encoder version: 1.2
Application version: 2.5
View MUX Bitrate Data for the Selected Transcoder
At the
[HCS7720 (#)] Command > prompt, type bits and press Enter.
MUX bitrate data for the selected transcoder card is displayed in millions of bits per second
(Mbit/s), for example:
HDMI Input Bitrate 6.684 Mbit/s (raw 6.684 Mbit/s)
Ethernet Input Bitrate: 3.826 Mbit/s (raw 3.838 Mbit/s)
Data Output Bitrate: 4.127 Mbit/s
Total Output Bitrate: 19.390 Mbit/s
Refer to the Installation & Setup Guide for HCS7720 transcoder cards for further information on
bitrate data.
Install a Pro:Idiom Key on the Selected Transcoder
This command installs the Pro:Idiom encryption key on the selected transcoder card. To
install a Pro:Idiom key on all the transcoders, see “Install a Pro:Idiom Key on All
Transcoders” on page 33.
Caution: Do NOT initiate simultaneous menu sessions while a Pro:Idiom key
installation is in progress. Doing so will interfere with the active processes and
may corrupt the system configuration and/or cause the HCS6320 card to cease
normal operation.
Note: In order for a Pro:Idiom encrypted channel to be displayed, the receiver
must contain a Pro:Idiom decrypter, and the receiver must be configured to allow
decryption of the desired channel.
Configuration Options via Command Line (Cont.)
(Continued on next page)