LG CodePlus MUX/MOD Feature Card HCS6320 - Manual (Page 31)

206-4183
31
View HCS6320 System Information
1. Access the HCS6320 Main Menu as described on the previous page.
2. At the
[Main] Command > prompt, type info and press Enter to display HCS6320 hard-
ware and software information.
The System Information display contains important information about the HCS6320, including
the unit hardware ID (firmware version), software versions, IP address, MAC address, and
serial number, for example:
System Information
------------------
Model: HCS6320
Hardware ID: 6320-v1.0-2011-1101
OS version: HCS6320-1102-2011-1031
Application version: 2.5
IP address: 10.166.60.81
MAC address: 00:0C:63:3C:00:02
Serial#: 901-12420020
It is recommended that you record this information for future reference. If you find it necessary
to call customer service or engineering support, please have this information available.
Set HCS6320 RF Channels
1. Access the HCS6320 Main Menu as described on the previous page.
2. At the
[Main] Command > prompt, type rf and press Enter.
3. At the Enter the start channel number [2 - 132] > prompt, type the appropriate
start channel number and press Enter.
The remaining channels will be automatically assigned per EIA-542 STD CATV frequency
allocation standards, and the system will display the channel assignments (i.e., the Channel
Map) for the card slots (see example under “Print the RF Channels Map” below).
Print the RF Channels Map
1. Access the HCS6320 Main Menu as described on the previous page.
2. At the
[Main] Command > prompt, type mrf and press Enter to display the current
Channel Map, for example:
Channel Map:
--------+-----------
Cards | RF Channel
--------+-----------
1, 2 | 2
4, 5 | 3
8, 9 | 4
11, 12 | 5
--------+-----------
Configuration Options via Command Line (Cont.)