Linksys WAPPOE - Manual (Page 12)

Chapter
Connection
PowerOverEthernetAdapterKt
Then connect the other end to the Ethernet port of your remotely
located access point or other network device.
NOTE: If the plug of the Splitter’s Power cord does not fit
into your network device, then use the included barrel jack
adapter. Plug the Splitter’s Power cord into the jack end, and
plug the other end of the barrel jack adapter into the Power
port of your network device.
Connect the Kit’s power adapter to the Injector, and plug the other
end into an electrical outlet or surge protector.
Congratulatons!ThenstallatonofthePowerOverEthernetKts
complete.
3.
4.