Linksys RangePlus WRT100 - Manual (Page 15)

Chapter3
Advanced Configuration
RangePlus Wreless Router
Security Mode > WPA2 Enterprise
Encrypton WPA2 supports two encryption methods,
TKIP and AES, with dynamic encryption keys. Select the
type of algorithm, AES or AES or TKIP. The default is AES
or TKIP.
RADIUS Server Enter the IP address of the RADIUS
server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 82.
Shared Secret Enter the key shared between the Router
and the server.
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal period is 3600 seconds.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Security Mode > RADIUS
IMPORTANT: If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server Enter the IP address of the RADIUS
server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 82.
Shared Secret Enter the key shared between the Router
and the server.
Encrypton Select a level of WEP encryption,
40/64 bts (0 hex dgts) or 04/28 bts (26 hex dgts).
The default is 40/64 bts (0 hex dgts).
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key -4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key Select which TX (Transmit) Key to use. The default
is .
WEP
WEP is a basic encryption method, which is not as secure
as WPA/WPA2.
Security Mode > WEP
Encrypton Select a level of WEP encryption,
40/64 bts (0 hex dgts) or 04/28 bts (26 hex dgts).
The default is 40/64 bts (0 hex dgts).
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key -4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key Select which TX (Transmit) Key to use. The default
is .