La Crosse Technology WS-6002U - Manual (Page 9)

9
VI) CALENDAR SETTING
Note: When the WWVB signal is found, that date will over-ride
the manually set date.
1) Hold down the “SET” button for 2 seconds (the selected time
zone will flash), press the “SET” button 5 more times, until the
default year “00” flashes in the date LCD.
2) Press and release the “+” button to select the year.
3) Press and release the “SET” button to confirm the year, and to
set the month.
4) The default month “1” will flash. Press and release the “+”
button to select the appropriate month.
5) Press and release the “SET” button to confirm the month, and
to set the date.
6) The default date “1” will flash. Press and release the “+”
button to select the appropriate date.
7) Press and release the “SET” button to confirm the date, and to
set the weekday.
8) The default weekday “MON” (depends on selected language)
will flash. Press and release the “+” button to select the
appropriate weekday.
9) Press and release the “SET” button to confirm the calendar
settings, and to advance to select either 12 or 24-hour time
display.
VII) 12/24-HOUR SETTING
1) Hold down the “SET” button for 2 seconds (the selected time
zone will flash), press the “SET” button 9 more times, until the
“12” hour time display flashes in the time LCD.
2) Press and release the “+” button to toggle between 12 and 24
hour time.
3) Press and release the “SET” button to confirm the 12/24-hour
time display, and to advance to select either
°F or °C.
Note: The “24 hour time” option is not recommended. The
LCD display will not show the first digit “2”.