La Crosse Technology WS-6002U - Manual (Page 5)

DETAILED SET-UP GUIDE
SET
I) BATTERY
INSTALLATION
Note: To avoid start-up problems make sure that the batteries
do not spring free.
Battery Compartment
Battery Cover
A) ATOMIC CLOCK
1) Remove the battery cover, located on the backside of the
function buttons.
2) Observe the correct polarity, and install 2 AA batteries.
3) Replace the battery cover.
Note: After the batteries have been installed all the LCD’s
(Liquid Crystal Display) will briefly light up. Then the indoor
temperature, the date as “1/ 1” and the weekday as “MON”
will be displayed. Also, the time will appear as “-:--” for
approximately 1 minute. Then the WWVB search is
automatically initiated, and a tower icon appears and flashes
with the time colon (no tower icon will appear if the WWVB is
too weak to be detected). While the WWVB search is being
conducted various numbers will appear in the time display.
The numbers “0”, “1”, or “8” will appear in the hour position
and the seconds will appear in the minute display. The Atomic
Clock will either display the WWVB time, or discontinue the
5