Lexmark N5 User Manual
Page 21
16
Setup
Windows 98/Me/2000
a
From the Start menu, click Settings
Printers.
b
Right-click the icon for your network printer.
c
Make sure Set as Default is selected and Use Printer
Offline is not selected, and then click Properties.
d
Click the Details or Ports tab.
e
From the Print to the following port: menu, select the
printer port that consists of the printer name followed
by the last six characters of the printer adapter MAC
address (for example, Lexmark_Z65_1008e8).
f
Click OK.
Windows XP
a
From the Start menu, click Control Panel Printers
and Other Hardware Printers and Faxes.
b
Click the Ports tab.
c
From the list of ports, select the one that consists of
the printer name followed by the last six characters of
the printer adapter MAC address (for example,
Lexmark_Z65_1008e8).
d
Click Apply.
e
Click OK.
Verify that an IP address is listed for your network
printer.
Note:
If there is not an IP address listed or your
network printer is
“Manually configure the network printer”
on page 34, and then continue with
step
.
Click Close.
From the Networking Options screen, click Cancel.
Exit the Lexmark Solution Center.
6
7
8
9
Select the network printer port.
10