Lanzar Car Audio SD34MIP - Manual (Page 17)

Common Operations DVD 03
17 28
05
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Setting the Sound Characteristics
Press VOL+ button to increase sou-
nd level and press VOL- button to decr-
ease
sound level.
the
the
Repeated pressing SEL button to select
the
mode in the following order: desired
Volume Control
* Rotating VOL on the head unit also performs
the same function.
* Pressing SEL and rotating VOL button on the
unit or set AUDIO SETUP in MAIN
MENU also performs the same function.
head
Note:
* When ome errors occur on the
also press RESET
it will
s display, you can
button to resume to normal,
and erase the clock setting and some me-
morized functions.
* This function can only be operated by the
head unit.
Release the front panel at first, and then
Press RESET button on the base w
object, (such as a ball
the unit to initial status.
ith
a pointed point pen)
to set
10
Turning the Unit On/Off
Press PWR button to turn on the unit,
press it again, the unit is still in
waiting
status. When insert a disc, unit will au-
tomatically start playing. Keep pressing it
to turn off the unit completely.
the
the
1
* During waiting status, briefly press PWR on
the head unit to turn on the unit, press and hold
it to turn off the unit.
Note:
15
15
Note:
15
1 After selecting the desired mode, you
adjust the current level by pressing
.
can
VOL buttons 15
, 2 If you don t adjust VOL buttons
in 3 seconds after selecting the desired
mode, the unit will automatically return
to the current mode being displayed.
wi-
th
15
Note:
VOL
TRE
BAS FAD BAL
EQ Setting
While listening to the popular music, classic
music or rock music, you can select the co-
rresponding preset modes to adjust the sound
quality perfectly by using EQ button.
Repeatedly pressing
to choose
the following modes in turn:
EQ button
* Press and hold EQ on the unit also
performs the same function.
head
27
Note:
27
ROCK CLAS POP
FLAT
--Dolby Digital Setup--
Dual Mono Example showing how to set stereo mode:
(Press (Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dual Mono
Dynamic
Dual Mono (1+1) Setup
Stereo
L-Mono
--Dolby Digital Setup--
R-Mono
Mix-Mono
Dynamic Example showing how to set dynamic range compression:
(Press (Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dynamic
Set DRC off
--Dolby Digital Setup--
1 4
1 2
3 4
Dual Mono