Pd25 and pd35 series post hole diggers, Options and accessories – Land Pride PD35 Series User Manual
Page 2

76
Post Hole Diggers PTO Drive
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
26776
PD25 and PD35 Series Post Hole Diggers
PD25
PD35
Tractor HP Range
25 to 55 HP
30 to 75 HP
Weight Without Auger
186 lbs.
233 lbs.
Auger Length
48"
Auger Flight Thickness
1/4"
Auger Pipe
2 1/2" ID
Auger Tooth Construction
Forged, Individually Replaceable
40 Degree angle installed on flat side
50 Degree angle installed on angled side
Number of Teeth
(6" - 2 teeth) (9" & 12" - 4 teeth) (15" - 5 teeth) (18" - 6 teeth) (24" - 8 teeth)‘
Pilot
Cast steel, 3 drill points
Driveline Cat.
Cat. III Shear bolt - Standard
Cat. III Radial pin clutch - Optional (Recommended on Auger Sizes 15" and above.)
Maximum Operating PTO Speed
300 RPM
Gearbox
540 RPM 3.18:1 Ratio
540 RPM 4:1 Ratio
Gearbox Oil Capacity & Type
4.6 Pints of SAE80-90W EP oil
9.1 Pints of SAE80-90W EP oil
Output Shaft
2" O.D. Round
3-Point Hitch Cat.
Cat. I & II
Boom Tube
3 1/2" O.D.
3 1/2" O.D.
Yoke Tube
2 7/8" O.D.
Options and Accessories
Auger Sizes (Options)
6", 9", 12", 15", 18", or 24"
Auger Extensions (Accessories)
7" & 14" Extensions Available
Cat. III Torque Limiter Driveline
Available
Available
Hydraulic Down Pressure Kit
Available
Available
Storage Stand
Available
Available
PD25 = 78 1/8"
PD35 = 79 3/8"
PD25 = 89 1/8"
PD35 = 90 3/8"
PD25/35 = 33 1/4"
PD25 & PD35 = 68 1/2" w/ 12" A
u
g
e
r
317-048S end
6/11/13