Taking your blood pressure – LifeSource ADVANCE MEMORY WRIST UB512 User Manual
Page 8

E-5
The UB-512 has several modes available to fit your blood pressure
monitoring needs.
Normal Measurement with AM or PM Readings Stored in Memory
Press the AM START or PM START button depending on time of day.
Your blood pressure is measured and the reading is stored into the
appropriate AM or PM memory. Each START button can store up to 30
readings in memory.
Recalling Previous Measurements
To recall previous measurements stored in memory, press and hold the
AM START or PM START button. Release the button after you see the first
reading recalled from memory. The previous measurements are displayed
from most recent to oldest.
Clearing Memory
To clear both AM and PM memory, simply remove batteries. Insert
batteries again to resume blood pressure measurements.
Taking a Measurement without Reading Stored in Memory (Guest Mode)
This mode can be used when storing readings in memory is not desired.
Readings stored in memory are automatically averaged and it is important
only to store your readings as other people's readings will affect your
average. Press both the AM START and PM START buttons at the same
time. A reading will be taken, but not stored into memory.
TAKING YOUR BLOOD PRESSURE
In Canada - Auto Control medical (Toll-free): 1-800-461-0991