LifeSource ADVANCE MEMORY WRIST UB512 - Manual (Page 13)

E-10
ABOUT mEmORY
The memory function on the UB-512 blood pressure monitor is designed
for categorizing each reading as an AM or a PM reading. For each START
button, the monitor can store up to 30 readings in memory. To keep track
of previous measurements accurately, we recommend that you use the
appropriate START button each time you take a blood
pressure reading.
To recall previous measurements in memory, press and
hold the AM START or PM START button. Your average
blood pressure reading will appear with the number of
measurements taken flashing several times. Release the
button after the display switches to the memory index
number (see illustration on right).
The previous measurements are displayed from most recent
to oldest. When viewing previous measurements, you will
see the "M" symbol appear on the upper left corner of this
display. You can stop this by pressing either START button
again.
NOTE: Memory will be lost if batteries become low or are removed.
LifeSource Health Line (Toll-free): 1-888-726-9966