LifeSource ADVANCE MEMORY WRIST UB512 - Manual (Page 10)

E-7
5 .
Press the AM START or PM START button. Your average
blood pressure reading will appear with the number of
measurements stored in memory (i.e. A25 = total of 25
measurements stored in memory). As the cuff pressurizes,
measurement will begin and the Cuff Inflation Meter will
show on the display screen. It is normal for the cuff to feel
very tight.
NOTE: If viewing measurements or storing readings in memory are not desired, press both the AM
START and PM START buttons at the same time. A reading will be taken, but not stored into memory.
NOTE: To stop inflation at any time, press either START button.
6 . As the cuff is inflating, the ❤ will appear to indicate that the
measurement is in progress. The monitor measures your blood
pressure while the cuff is inflating, so remain still. Once the pulse is
detected, the symbol will flash with each pulse beat.
7 . When measurement is complete, the systolic
and diastolic pressure and pulse rate readings
are displayed. The cuff will automatically
deflate completely, releasing any remaining air.
8 . Press either START button once to turn
off power. The device has an automatic
power-down feature which turns off power
automatically one minute after measurement is obtained.
For the most useful blood pressure history, we recommend that you record
the date and time after each measurement. The most accurate history
relies not on a single or sporadic readings, but on a consistent monitoring
pattern over time.
NOTE: If you have poor blood circulation in winter (especially when your hands and wrists are cold), you
may not get a blood pressure measurement.
sysTolIC
dIasTolIC
PulsE
TAKING YOUR BLOOD PRESSURE
In Canada - Auto Control medical (Toll-free): 1-800-461-0991