Lennox Hearth CI2500DVF User Manual
Page 20
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Printed in U.S.A. © 2003 Lennox Hearth Products
P/N 775,148M REV. B 11/2004
REFERENCE INFORMATION
If Optional Warming Shelves are purchased, install as follows:
Optional Warming Shelves Kit
Kit Contents:
2 ea. Warming Shelves
4 ea. Decorative Brackets
4 ea. Insets (CI1500 Series)
6 ea. Insets (CI2500 Series)
4 ea. Screws, 6mm x 20mm
1 ea. Instruction Sheet
Tools Required:
Phillips Screwdriver
Installation Instructions:
1. Lift off trivet, then stove top and set aside.
3. Using the existing screws on the stove body, install both warming
shelve assemblies as shown in Figure 22. Tighten screws just enough
to level shelves.
Install Screws Provided
Install, using
the existing
screws.
Figure 21
Figure 22
4. Place the insets (4 ea. for the CI1500 series or 6 ea. for the CI2500
series) into the recessed areas on both warming shelves as shown in
Figures 23 & 24. Note: Common ceramic tiles (4 ¼” square) can be
used in place of insets on the warming shelves (available at most
home improvement stores).
Install Insets
Place insets as
shown here.
Top View of Warming Shelves Installed
5. Reinstall stove top into position (see Figure 24).
Figure 23
Figure 24
Proper Use Instructions:
These attractive shelves are designed to be functional for placing
food to stay warm. For cleaning instructions see
Cleaning Enamel
Surfaces on page 4.
IMPORTANT NOTES:
• NEVER PLACE ANYTHING ON THE SHELVES WHICH EXCEEDS 80
POUNDS (36 KILOGRAMS).
• NEVER PLACE FOOD CONTAINERS OR OTHER MATERIALS ON THE
SHELVES THAT MAY BE SUBJECT TO MELTING.
1110 West Taft Avenue • Orange, CA 92865
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Lennox reserves the right to make changes at any time, without notice, in design,
materials, specifi cations, prices and also to discontinue colors, styles and products.
Consult your local distributor for fi replace code information.
Installing onto Stove Body
Assemble Shelves to Brackets
2. Install decorative brackets to both warming shelves using the screws
provided (see Figure 21).
CAUTION: THE CAST IRON STOVE TOP IS VERY HEAVY AND MAY REQUIRE
A MINIMUM OF TWO PEOPLE TO LIFT; ONE PERSON ON EACH SIDE (THE
CI1500 SERIES CAST TOP WEIGHS ~20 POUNDS AND THE CI2500 SERIES
CAST TOP WEIGHS ~40 POUNDS).