Lexicon 570 - Manual (Page 29)

24
Dancer Communications, Inc.
„ Alarm Set-up
Type ALM S at the command prompt and the Messenger 570 system will display a sub-menu of alarm related
parameters that you can alter.
COMMAND>ALM S
ALARM SETUP
===== =====
1 = Local Alarm Siren Enabled
2 = Dial-out Interval 60 min.
3 = Inter Dial Delay 0 min.
4 = Snooze Timer Delay 160 hours
5 = Alarm Dialout Trigger Individual Alarms
0 = Previous Menu
Choose a Number>
Local Alarm Siren
When enabled, the Messenger 570 system's internal beeper will sound whenever an unacknowledged alarm
exists. When disabled, the beeper will never sound.
COMMAND>ALM S
ALARM SETUP
===== =====
1 = Local Alarm Siren Enabled
2 = Dial-out Interval 60 min.
3 = Dial-out Delay 1 min.
0 = Previous Menu
Choose a Number>1
Local Alarm Siren Enabled
Change Present State? [y/n]> No
Dial-out Interval
This parameter specifies the amount of time the Messenger 570 system will wait after attempting to dial
every phone number before it will attempt to dial again.
COMMAND>ALM S
ALARM SETUP
===== =====
1 = Local Alarm Siren Enabled
2 = Dial-out Interval 60 min.
3 = Dial-out Delay 1 min.
0 = Previous Menu
Choose a Number>2
Enter New Dial-out Interval>60