Lucent Technologies Cajun M770 User Manual
Page 29
Chapter 3
Device Configuration
Cajun M770 Manager User’s Guide
17
Note: When configuring the ATM source port, ensure that the ATM module/port
can be used as a clock synchronization source. Suitable modules/ports are:
Ports 1 and 2 on M15-155 modules with C/S 2.0 or higher.
All ports on M3-622 modules with C/S 1.0 or higher.
For a full description of all configuration fields in the ATM Clock Synchronization
dialog box, refer to Appendix B, Configuration Fields.
See also other documents in the category Lucent Technologies Hardware:
- 9076 (150 pages)
- CELLPIPE 7820-0766-004 (48 pages)
- AnyMedia Line Access Gateway (4 pages)
- CellPipe 22A Series (2 pages)
- Stinger MS+DSL (2 pages)
- ATM Module 8-Port DS3/E3 (2 pages)
- Web Services Gateway OmniAccess 8550 (8 pages)
- 7820-0657-001 (34 pages)
- Alcatel-Lucent VPN 1200 (6 pages)
- Stinger STGRSACR-SO-ADSL2P (2 pages)
- 106433691 (7 pages)
- 2000 (2 pages)
- VPN Firewall Brick 20 (4 pages)
- 20A-USB (2 pages)
- GW-DS300N (78 pages)
- Network Access Module (75 pages)
- Wavelength Extension Solution Metropolis (4 pages)
- Lucent Network Gateway (2 pages)
- 20H (2 pages)
- 5800 Series (88 pages)
- Cajun Switch P550R (41 pages)
- PortMaster (364 pages)
- 2300 (2 pages)
- Multiplexer and Transport System ADM 16/1 (8 pages)
- DSL Element Management System NavisAccess (4 pages)
- Ethereal (199 pages)
- 3000 (586 pages)
- CellPipe 55 Series (2 pages)
- Telephone User Interface Serenade (2 pages)
- APX 1000 (4 pages)
- PacketStar PSAX (4 pages)
- DSL Access Concentrator Stinger FS+ (4 pages)
- USS-720 (96 pages)
- AnyMedia 4300 (2 pages)
- CellPipe 40H-CES (2 pages)
- Stinger Trunk Module OC-12/STM-4 (2 pages)
- Host-Based Controller Modem AT (87 pages)