LG Option Type 1045 - Manual (Page 22)

Daft 2000/12/04
Getting Started
14
1
❖ ❖ ❖ ❖ Immediate Transmission
Note
❒ To return the machine to standby mode, do one of the following:
• If you have set the original and have not pressed the {Start} key, remove
the original.
• If you have not set an original, press the {Clear Modes} key.
• If you are in User Tools mode, press the {User Tools/Counter} key.
Communication Display
While the machine is communicating, the status is displayed.
❖ ❖ ❖ ❖ Memory Transmission
Note
❒ Even when the machine is using memory to fax a message or receive a mes-
sage, you can still scan the next original into memory.
⇒ Chapter 4, "More
Transmission Functions" in the Advanced Features manual.