Lantronix EDS Device Servers EDS16PR - Manual (Page 38)

6: Configuration Using the Web Manager
EDS Device Servers User Guide 38
Navigating Through the Web Manager
The Web Manager provides an intuitive point-and-click interface. A menu bar at the left
side of each page provides links you can click to navigate from one page to another.
Some pages are read-only, while others let you change configuration settings.
Note: There may be times when you must reboot the EDS for the new
configuration settings to take effect. The chapters that follow indicate when a
change requires a reboot.
Figure 6-6 shows the structure of the multilevel Web Manager configuration pages.
Summary of Web Manager Pages
Page Description See
Page
Status Displays EDS product information and network, line, and
tunneling settings. 47
Network Lets you configure the current network interface on the EDS. 48
Line Displays statistics and lets you change the current configuration
and Command mode settings of 4 serial lines for the EDS4100,
8 tunnels for the EDS8PR,16 serial lines for the EDS16PR, and
32 serial lines for the EDS32PR. 51
Tunnel Displays and lets you change the current configuration settings for
up to 4 tunnels for the EDS4100, 8 tunnels for the EDS8PR, 16
tunnels for the EDS16PR, and 32 tunnels for the EDS32PR. 56
Terminal Displays and lets you change current settings for a terminal. 72
Host Displays and lets you change settings for a host on the network. 73
DNS Displays the current configuration of the DNS subsystem and lets
you change primary and secondary DNS servers. 76
SNMP Displays and lets you change the current Simple Network
Management Protocol (SNMP) configuration settings. 77
FTP Displays statistics and lets you change the current configuration
for the File Transfer Protocol (FTP) server. 79
TFTP Displays statistics and lets you change the current configuration
for the Trivial File Transfer Protocol (TFTP) server. 80
Syslog Lets you specify the severity of events to log and the server and
ports to which the syslog should be sent. 81
HTTP Displays HyperText Transfer Protocol (HTTP) statistics and lets
you change the current configuration and authentication settings. 81
RSS Displays and lets you change current Really Simple Syndication
(RSS) settings. 88
CLI Displays Command Line Interface (CLI) statistics and lets you
change the current CLI configuration settings. 89
Email Displays email statistics and lets you clear the email log,
configure email settings, and send an email. 125
LPD Displays LPD (Line Printer Daemon) Queue statistics and lets you
configure the LPD and print a test page. 89