Lowrance electronic GlobalMap 3300C - Manual (Page 74)

68
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the northeast.
In Fig. 3 the traveler has turned northeast on his new course and is
heading straight for Wpt 2, which is 0.27 miles away. Fig. 4 shows route
navigation on the Map Page. In this figure, the traveler has reached Wpt
2 and is starting on the leg between Wpts 2 and 3.
Trails
Delete a Trail
This is the command used to erase or delete a trail:
Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail name|
ENT |
↓ to
D
ELETE
T
RAIL
| ENT |
← to
Y
ES
| ENT .
Figure 4. Figure 3.
Figure 2. Figure 1.