Lenovo THINKSERVER RS210 User Manual
Page 6

Recovering the server firmware .
Automated boot recovery (ABR) .
Solving Ethernet controller problems
Solving undetermined problems .
Chapter 5. Locating Server Controls and connectors . . . . . . . . . . . . . . . 105
System-board internal connectors.
System-board external connectors
System-board optional-device connectors .
System-board switches and jumpers .
. . . . . . . . . . . . . . . . . . . . . . . . . . 115
Guidelines for trained service technicians .
Inspecting for unsafe conditions .
Guidelines for servicing electrical equipment .
Working inside the server with the power on .
Handling static-sensitive devices .
Major components of the server .
Removing and installing the cover .
Removing and installing the bezel .
Removing and installing the DIMM air baffle
Installing the DIMM air baffle .
Replacing a memory module (DIMM) .
Removing a simple-swap Serial ATA (SATA) hard disk drive
Installing a simple-swap Serial ATA (SATA) hard disk drive .
Removing a hot-swap hard disk drive .
Installing a hot-swap hard disk drive .
Replacing a USB embedded hypervisor flash device
Removing a USB embedded hypervisor flash device .
Installing a USB embedded hypervisor flash device
Replacing the operator information panel assembly.
Removing the operator information panel assembly
Installing the operator information panel assembly .
Replacing the microprocessor and heat sink .
Installing the microprocessor .
iv
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual