Lantronix MSS - Manual (Page 73)

Command Reference Show Hostlist
2-64
2.87 Show Hostlist
Displays the current list of remote hosts to use for multihost mode connections.
See Also Status Displays, page 5-6; Multihost Mode, page 5-11; Hostlist, page 2-58.
2.88 Show IPsecurity
Displays the current TCP/IP security table. Each address or range is shown, along with the direction of
concern.
See Also Status Displays, page 5-6.
2.89 Show NetWare
Displays NetWare characteristics, including frame types, routing status, and internal network number.
Errors Does not apply to MSSLite, MSS-VIA, or the MSS4.
See Also Status Displays, page 5-6.
2.90 Show Nodes
Displays information about the desired LAT or SPX service nodes.
Errors All nodes will be shown if no node is specified.
Does not apply to the MSS-Via, MSS4, or MSSLite.
Parameters LAT
Shows LAT nodes identification strings and availability.
SHOW HOSTLIST
SHOW IPSECURITY
SHOW NETWARE
SHOW NODES
LAT
SPX  
 
 