Lantronix MSS - Manual (Page 38)

Command Reference Change LAT Groups
2-29
2.27 Change LAT Groups
Specifies the LAT service groups to which the MSS can connect. Groups are numbered from 0 to 255.
Restrictions Requires privileged user status.
Errors The MSSLite, MSS4, and the MSS-VIA do not support LAT.
Parameters groupList
Specify a list of groups to replace the current list. Use commas to separate
group numbers, and use hyphens to separate ranges.
Defaults 0 (group zero)
Examples CHANGE LAT GROUPS 17,21-28,118-211,220
2.28 Change LAT Identification
Sets the text string that identifies the MSS on LAT networks.
Restrictions Requires privileged user status.
Errors The MSSLite, MSS4, and the MSS-VIA do not support LAT.
Parameters identString
Enter a string of 40 or fewer characters. Enclose the string in quotes if it
contains lower-case letters, spaces, or punctuation.
2.29 Change Loadhost
Specifies the TCP/IP host from which the MSS requests its runtime code.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
CHANGE LAT GROUPS
ALL
groupList
NONE  
 
 
 
 
CHANGE LAT IDENTIFICATION identString
CHANGE SERVER SECONDARY LOADHOST IPaddress