Lantronix MSS - Manual (Page 35)

Command Reference Change Incoming
2-26
Parameters Server
MSS4 only.
period
Enter a length of time in minutes (1 to 120) or seconds (5 to 60). For minutes,
add an m after the number. For seconds, add an s after the number.
Defaults 30 minutes
Examples Local> CHANGE INACTIVE TIMER 10m
See Also Change Inactive Logout, page 2-25.
2.23 Change Incoming
Permits or denies incoming Telnet, Rlogin, and LAT connections and enforces password protection. The
Show Server command shows the status of incoming connection parameters.
Restrictions Requires privileged user status.
The MSSLite, MSS-VIA, and the MSS4 do not support LAT or the Both
parameter.
Parameters Server
MSS4 only.
Telnet
Enables incoming Telnet connections.
LAT
Enables incoming LAT connections.
Both
Enables incoming Telnet and incoming LAT connections. Only valid on
models with LAT support.
None
Disables all incoming connections.
CHANGE SERVER INCOMING
TELNET
LAT
BOTH
NONE
PASSWORD
NOPASSWORD  
 
 
 
 
 
 
 
 
 
 