beautypg.com

Lowrance electronic Lowrance Fish-finding Sonar & Mapping GPS LMS-520C User Manual

Page 222

background image

212

Add Fuel

After entering the amount of fuel added to a tank in the Fuel Added

dialog, the Add Fuel command finalizes the entry of the data. Like the

Fuel Added dialog, the Add Fuel command will only be used when an

amount of fuel is added that does not fill up the tank.

Fill Tank

You will use the Fill Tank command when calibrating a fuel flow and

when filling up the tank without calibration.
Adding Fuel to Tank
Tank Location, Fuel Added and Add Fuel commands work together to

keep NMEA 2000 fuel data consistent with the actual amount of fuel

added to the fuel tank(s).
1. Press

MENU

|

MENU

, select

NMEA

2000

and press

ENT

.

2. The NMEA 2000 menu will appear with five options: Bus Setup,

Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-

light Synchronization. Select

F

UEL

M

ANAGEMENT

and press

ENT

.

3. Highlight

T

ANK

L

OCATION

and press

ENT

. The Tank Location menu will

appear with up to three options: Port, Center and Starboard.
4. Select the tank you added fuel to and press

ENT

.

5. Follow the steps below that apply to your tank.
If you filled up the tank:
A.
Press the

F

ILL

T

ANK

button and press

ENT

. The following message will

appear: Are you sure you wish to Fill Tank? Press

ENT

. Another mes-

sage will appear: Do you wish to re-calibrate the device? Highlight

N

O

and press

ENT

.

If you did not fill up the tank:
B.
Highlight

F

UEL

A

DDED

and press

ENT

to access the

F

UEL

A

DDED

dialog

box. Use

↑ ↓ , ← → to input the amount of fuel added to the tank and

press

ENT

. Select the

A

DD

F

UEL

button and press

ENT

. The following mes-

sage will appear: Are you sure you wish to Add Fuel? Highlight

Y

ES

and

press

ENT

.

6. Press

EXIT

repeatedly to get back to the main display.

Engine Operations
The lower half of the Fuel Management menu contains the following

Engine Operation functions: Engine Select, Reset Calibration, Reset

Trip and Reset Seasonal.

Engine Select

Engine Select allows you to choose the desired engine when resetting

calibration, resetting trip fuel and resetting seasonal fuel.

www.Busse-Yachtshop.de email: [email protected]

This manual is related to the following products: