LSI 7102XP-LC - Manual (Page 43)

Physical Characteristics 2-25
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
2.8.16 LSI7402EP-LC Connectors and Indicator LEDs
The LSI7402EP-LC I/O bracket is configured as shown in Figure 2.16 .
The LC connectors provide the connections from the adapter channels to
the FC subsystem. The indicator LEDs indicate link status, activity, and
link fault.
Figure 2.16 LSI7402EP-LC Connectors and Indicator LEDs
Table 2.14 describes the LSI7402EP-LC Link Activity/Link Fault LED
appearance that indicates a valid link, presence of link activity, or a fault
on the link.
Table 2.14 LSI7402EP-LC Link Activity/Link Fault LEDs
Link Activity Fault
LED Appearance Off Green Blinking Yellow
Port 0
Port 2 LED
Port 1
Port 0 LED
Port 3 LED
Port 1 LED
Port 2
Port 3