LSI 7102XP-LC - Manual (Page 25)

PCI System ID Values 2-7
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
2.4.3 FC Interface
The FC interface varies, depending on which LSI Logic 2 Gbit/s host
adapter you have selected. Refer to
Section 2.8, “Physical
Characteristics,” page 2-9 for details.
2.4.4 FC Link Activity/Link Fault LED
The LSI Logic 2 Gbit/s host adapters provide dual-purpose LEDs that
indicate activity on the FC link. These LEDs (one per port) are visible
near the ports on the bracket.
Figure 2.4 shows the appearance of the
Link Activity/Link Fault LED that represents the given link status for each
of the LSI Logic host adapters.
2.5 PCI System ID Values
All LSI Logic 2 Gbit/s host adapters share common PCI Vendor ID (VID)
values and are assigned device ID (DID) values to allow drivers and
BIOS to recognize them as 2 Gbit/s capable FC products.
Table 2.1
provides the VID and DID for all LSI Logic 2 Gbit/s FC host adapters.
Table 2.4 LED Appearance to Represent Link Status
Adapter Link Activity Fault
LSI7102XP-LC Off Green Blinking Yellow
LSI7102LXP-LC Off Green Blinking Yellow
LSI7202XP-LC Off Green Blinking Yellow
LSI7202LXP-LC Off Green Blinking Yellow
LSI7202EP-LC Off Green Blinking Yellow
LSI7202EP Off Green Blinking Yellow
LSI7402XP-LC Off Green Blinking Yellow
LSI7402EP-LC Off Green Blinking Yellow
LSI7402EP Off Green Blinking Yellow