Lexicon Reverb/Effects Processor PCM96 - Manual (Page 11)

5
the ReAR PANeL
1. POwER JACK
Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic
switching to correct voltage range.
2. ETHERNET INPUTS
These RJ-45 connections are used to network PCM96 devices and control
them via Ethernet.
3. MIDI IN
Receives MIDI information from other MIDI equipment such as master
keyboard controllers, MIDI foot controllers, sequencers and synthesizers.
MIDI THRU
Passes any MIDI data received without change.
MIDI OUT
Transmits MIDI data to other equipment.
4. AES/EBU In/Out
AES/EBU format digital connectors conform to AES professional standards.
5. ANALOG IN/OUT
Output impedance is 30Ω, electronically balanced, and levels up to +20dBu
maximum full scale.
6. FIREwIRE TM PORTS
Connect FireWire TM cables here. Either port can be used, with the other act-
ing as Thru.
7. wORD CLOCK INPUT
This connection allows the PCM96 to lock to a master system clock. It is
not terminated. For best results we recommend using “T” connectors when
setting up a BNC Word Clock network and terminating the end of of this
network with a 75 ohm BNC terminator.
1 2
7 6
5 4 3