Lexicon Reverb/Effects Processor PCM96 User Manual
Page 10
4
9. Power Button
Press to turn the PCM96 on or off.
10. Display
This high resolution, high contrast, and high viewing angle OLED (Organic
LED) display shows menu and box configuration and status information.
11. BACK
Pressing this button moves you up one level in the menu tree. Note that
when a System preset is loaded, this button takes you to the System Mode
Category Selection menu. When a Machine preset is loaded, the Back but-
ton takes you to the Machine Mode Category Selection menu.
12. LOAD
Press this button to load the selected preset. You can also press the Select
knob to load a preset.
13. COMPARE
This button is used to compare an edited preset against its unedited self.
When a preset is loaded, this button’s LED is off. As soon as the preset is
edited in any fashion, the LED lights. If the button is pressed, the edited
state is temporarily stored and the preset is reloaded from the file system.
During this period of time, editing is disallowed and the button LED blinks
rapidly. When the Compare button is pressed a second time, the edited state
is restored, editing is allowed again, and the LED is illuminated.