Mount the clock – Lathem PayClock PC400TX User Manual
Page 10
4 - PC400 Terminal Installation & User’s Guide
C H A P T E R
2
Mount the Clock
Find a suitable location where:
Temperature stays within 32
°-110° F
Humidity remains below 95%
No excessive vibrations are present
An electrical outlet is within 4 feet
Note: Exposure to outdoor conditions, rain, snow, etc voids the warranty.
Wall Mount - To install the back box
♦ Locate a flat wall surface. Place the back box on the wall 48 inches from the floor,
with a pencil trace the outline where the 3 holes will be drilled.
Figure 1
Alternative Mounting: Install the
back box directly to an electrical
box.
Figure 1
Raised Strain Relief
Points.
To use these, slide the
tie wrap through the
raised slot(s) and
secure around cable
and power cord.