Lenovo 1047 - Manual (Page 94)

Table 21. Items under the PCIPnP menu (continued)
Item Option Description
LAN1 OP-ROM [Enabled] / Disabled Enable or disable the wake-up from
LAN 1.
LAN2 [Auto] / Enabled / Disabled The Auto option means to
automatically enable the integrated
Ethernet controller 2. The Enabled
option means to enable the integrated
Ethernet controller 2. The Disabled
option means to disable the integrated
Ethernet controller 2.
LAN2 OP-ROM [Enabled] / Disabled Enable or disable the wake-up from
LAN 2.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 22. Items under the Boot menu
Item Sub-item Option Description
Quick Boot [Disabled] / Enabled Enable or disable the quick
boot feature.
Quiet Boot [Enabled] / Disabled Enable or disable the
feature to show OEM Logo
during the POST.
AddOn ROM Display Mode [Force BIOS] / Keep Current Set the AddOn ROM
Display Mode.
Boot Settings Configuration
Bootup Num-Lock [Off] / On Set the Num-Lock LED
state.
1st Boot Device Boot device names Boot Device Priority
2nd Boot Device Boot device names
Set the startup device
sequence (support at most
five startup devices).
Hard Disk Drives 1st Drive2nd Drive... Based on the installed hard
disk drives.
CD/DVD Drives 1st Drive... Based on the installed
optical drives.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 23. Items under the Security menu
Item Description
Change Supervisor Password Set or change the supervisor password. The password
can be any combination of up to 6 (1 to 6) alphabetic and
numeric characters.
Change User Password Set or change the user password. The password can
be any combination of up to 6 (1 to 6) alphabetic and
numeric characters.
Note: The settings in [ ] are the default settings in the Setup Utility program.
82 ThinkServer User Guide