Lenovo 1047 - Manual (Page 93)

Table 18. Submenus under the IPMI 2.0 Configuration (continued)
Item Sub-item Option Description
BMC Watch Dog Timer
Action [Disabled] / Reset System /
Power Down / Power Cycle Disable or enable the OS
based dongle. If enabled,
whenever any problems
arising from the operation
system, such as the
system halted, the system
management feature will
take actions of Reset
System, Power Down, or
Power Cycle at the prompt
of the dongle Timer.
BMC Alert LED and Beep [Off] / On Turn on or turn off the BMC
alert LED and beep.
FW key [0000000]
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 19. Submenu under the Intel VT-d Configuration
Item Option Description
Intel VT-d Disabled / [Enabled] Enable or disable the virtualization
technology for I/O devices.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 20. Submenus under the Remote Access Configuration
Item Option Description
Remote Access [Disabled] / Enabled Enable or disable the serial port
remote access.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 21. Items under the PCIPnP menu
Item Option Description
Clear NVRAM [No] / Yes If this option is set to Yes, that means
to clear the NVRAM information when
the system starts up.
Boots Graphic Adapter Priority [Auto] / Onboard VGA If this option is set to Auto, the
external graphics card will be enabled
firstly. If no external graphics card,
the integrated graphics controller is
automatically enabled. If this option
is set to Onboard VGA, only the
integrated graphics card is enabled.
LAN1 [Auto] / Enabled / Disabled The Auto option means to
automatically enable the integrated
Ethernet controller 1. The Enabled
option means to enable the integrated
Ethernet controller 1. The Disabled
option means to disable the integrated
Ethernet controller 1.
Chapter 6 . Configuring the server 81