Life Fitness 880 - Manual (Page 34)

STEP 40:
34
• Route the PRESS/LEG CABLE (47) under one 4-1/2” V-GROOVE PULLEY (45) and assemble the 4-1/2” V-GROOVE PULLEY
(45) to the vertical bracket on the PRESS FRAME (32) using 3/8 X 2-3/4” BOLT (90) and one 3/8” LOW HEIGHT LOCK NUT
(83). See FIGURE 40.
STEP 41:
• Route the PRESS/LEG CABLE (47) around one 3-1/2” PULLEY (44) and assemble to the horizontal bracket on the PRESS FRAME
(32) using one 3/8 X 1-3/4” BOLT (88), one CABLE RETAINING CLIP (105) and one 3/8” LOCK NUT (82). See FIGURE 41.
• Route the PRESS/LEG CABLE (47) around one 3-1/2” PULLEY (44) and assemble to the vertical bracket on the PRESS FRAME
(32) using one 3/8 X 1-3/4” BOLT (88) and one 3/8” LOCK NUT (82). See FIGURE 40.
• Securely assemble the PRESS/LEG CABLE (47) and one 3-1/2” PULLEY (44) to the PRESS FRAME (32) using one 3/8 X 3-3/4”
BOLT (93), two 3/8” X 1-1/16” FLANGE SPACERS (56) and one 3/8” LOCKNUT (82).
FIGURE 40
FIGURE 41
45
3/8 X 1-3/4” 88
3/8 X 3-3/4” 93
3/8 X 2-3/4” 90
47
32
3/8 X 1-3/4” 88
32
82
105
44
47
56
44
83
82