Life Fitness 880 - Manual (Page 17)

17
FIGURE 13
STEP 13:
• Insert two 1/2” FLANGE BEARINGS (54) into the the LEG PEDESTAL (2) as shown in FIGURE 13.
• Assemble the LEG PEDESTAL (2) to the FRAME (1) using two RH CAPS (64), one 1/2 X 4” BOLT (95), two 1/2” RH
WASHERS (65), and one 1/2” LOW HEIGHT LOCK NUT (85). (Note: Tighten this connection enough to remove excess
play yet allow the LEG PEDESTAL to rotate freely.)
STEP 14:
FIGURE 14
• SECURELY assemble one PEC STATION PAD (3) to the FRAME (1) using two 3/8 X 2-3/4” BOLTS (90) and two 3/8” WASHERS
(80). See FIGURE 12.
90 3/8 X 2-3/4”
95 1/2 X 4”
3
1
80
54
2
66
85
1
65
64
• Assemble one 1-1/4” RUBBER BUMPER (66) to the FRAME (1) where the LEG PEDESTAL (2) contacts the FRAME (1) as
shown in FIGURE 13.