Life Fitness 880 - Manual (Page 18)

• Assemble two ROLLER PADS (117) to the LEG PEDESTAL (2) using one 3/4 X 17” TUBE (19) and two 3/4” STARLOCK
COLLARS (60) as shown in FIGURE 15.
• Assemble two ROLLER PADS (117) to the SEAT ADJUST (4) using one 3/4 X 17” TUBE (19), two PLASTIC WASHERS (63)
and two 3/4” STARLOCK COLLARS (60) as shown in FIGURE 15.
• Assemble two ROLLER PADS (117) to the FRAME (1) using one 3/4 X 17” TUBE (19), two PLASTIC WASHERS (63) and
two 3/4” STARLOCK COLLARS (60) as shown in FIGURE 15.
STEP 15:
FIGURE 15
FIGURE 16
18
STEP 16:
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
• LOOSELY assemble the PRESS FRAME (32) to the BASE FRAME (9) using two 3/8 X 3-3/4” BOLTS (93), two 3/8” WASHERS
(80) and two 3/8” LOCK NUTS (82) as shown in FIGURE 16.
1
2
117
63
60
80
9
82
32
3/8 X 3-3/4” 93
19