The following is an example value – Linksys VOICE SYSTEM SPA 900 SERIES User Manual
Page 49
3-6
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
Localization
•
Dictionary server script—This parameter is used to define the location of the dictionary server, the
languages available and the associated dictionary. The syntax is as follows:
The default is blank and the maximum number of characters is 512. The detailed format is
as follows:
serv={server ip port and root path};
d0=
d1=
d2=
d3=
d4=
d5=
d6=
d7=
d8=
d9=
The following is an example value:
serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml
•
Language Selection—This parameter is used to select the default language. Its value needs to match
one of the languages supported by the dictionary server. The script (dx value) is as follows:
The default is blank and the maximum number of characters is 512. The following is an
example:
These parameters can also be modified from the administration web server, on the Regional set-
tings tab, as shown in
.
Figure 3-3
Dictionary Server Configuration Parameters
During startup, the phone checks the selected/preferred language and downloads the dictionary from the
TFTP/HFTP provisioning server indicated in the device configuration. The dictionaries are available at
the following website: