Linksys VOICE SYSTEM SPA 900 SERIES - Manual (Page 126)

5-21
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Control Timer Values (sec)
Field Description
Cadence 1 Cadence script for distinctive ring 1.
Defaults to 60(2/4).
Cadence 2 Cadence script for distinctive ring 2.
Defaults to 60(.3/.2, 1/.2,.3/4.
Cadence 3 Cadence script for distinctive ring 3.
Defaults to 60(.8/.4,.8/4).
Cadence 4 Cadence script for distinctive ring 4.
Defaults to 60(.4/.2,.3/.2,.8/4).
Cadence 5 Cadence script for distinctive ring 5.
Defaults to 60(.2/.2,.2/.2,.2/.2,1/4)
Cadence 6 Cadence script for distinctive ring 6.
Defaults to60(.2/.4,.2/.4,.2/4).
Cadence 7 Cadence script for distinctive ring 7.
Defaults to 60(4.5/4).
Cadence 8 Cadence script for distinctive ring 8.
Defaults to 60(0.25/9.75)
Cadence 9 Cadence script for distinctive ring 9.
Defaults to 60(.4/.2,.4/2).
Field Description
Reorder Delay
(Not applicable to SPA901)
Delay after far end hangs up before reorder tone is played. 0 = plays immediately, inf =
never plays. Range: 0–255 seconds.
Defaults to 255.
Call Back Expires Expiration time in seconds of a call back activation. Range: 0–65535 seconds.
Defaults to 1800.
Call Back Retry Intvl Call back retry interval in seconds. Range: 0–255 seconds.
Defaults to 30.
Call Back Delay
(Not applicable to SPA901)
Delay after receiving the first SIP 18x response before declaring the remote end is
ringing. If a busy response is received during this time, the Linksys IP phone still
considers the call as failed and keeps on retrying.
Defaults to 0.5.