Lowrance electronic LCX-17M - Manual (Page 144)

136
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 3; the arrival alarm has been triggered and
the bearing arrow on the compass rose is turning to point toward Wpt
4, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 4, which is 2.36 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 4 and is half-way along the leg between Wpts 4 and 5.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press ↓ to select route name| ENT | ↓ to N
AVIGATE
| → to R
EVERSE
| ENT | ←
to N AVIGATE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C
ANCEL
N
AVIGATION
| ENT |
← to
Y
ES
| ENT .
Figure 2. Figure 1.
Figure 3. Figure 4.