Lowrance electronic LCX-17M - Manual (Page 135)

127
S
ETUP
| ENT |
↓ to
T
RANSFER
M
Y
D
ATA
| ENT and the following screen
appears.
The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message which tells you if a
MMC is present or not. If no MMC is present, you must first insert a
card into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press ENT (for S
AVE
.)
To transfer data from the MMC to the unit: press → to L
OAD
| ENT .
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
↓ to
S AVE D ATA
| ENT . If you wish to rename the file (as
shown in the following figures), press ENT to activate the Data selection
box. Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press ENT | ↓ to
S AVE D ATA
| ENT .
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press
EXIT .
From left to right, these figures show the sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.