Linear REMOTE ACCESS SOFTWARE DVS-1200 - Manual (Page 4)

2
1.2 SYSTEM REQUIREMENTS
Minimum System Requirements:
IBM compatible 486 personal computer with 8 Mb RAM
Windows 95/98/NT/ME/XP/2000 operating systems
VGA monitor
Name brand modem that is capable of 300 baud (BELL 103
compatible)
Hard disk drive with 10 Mb available space for the software
plus 18K available space for each Account Profi le fi le.
CD drive
Recommended System:
Pentium or better based personal computer with 16 Mb RAM
or more
Windows 95/98/NT/ME/XP/2000 operating systems
SVGA video card
Microsoft compatible mouse
Name brand modem that is capable of 300 baud (BELL 103
compatible)
Large hard disk drive (1000 Account Profi les use about 20
Mb)
CD drive
Compatible Systems Note:
The software described in this manual supports the programming of a variety of
models of Linear’s Wireless Security Systems. References in these instructions are
focused on the Model DVS-2400.
The programming differences for the other models supported by this software are:
DVS-1200: This model is identical to the DVS-2400 with the limitation of supporting
only 12 sensors. Only the fi rst 12 sensors can be programmed in Sections 4.9,
4.13.1, and 4.13.2.
DVS-2408/DUAL-824: This model programs the same as the DVS-2400 with the
addition of supporting 8 hardwired loops. Hardwired loop programming is described
in Section 4.9.
PERS-2400: This model is not a Security System, but a Personal Emergency
Reporting System. Refer to the RA-2400/PERS-2400 Programming Reference
Guide P/N: 217163 for details on programming this model.
217473 C - IMAGE 4