Linear REMOTE ACCESS SOFTWARE DVS-1200 - Manual (Page 20)

18
4.3 CONSOLE ACCESS CODES
PURPOSE:
To install a Master Access Code and up to 5 Restricted Access Codes,
a Duress Code, and a Page Alert Code.
CODE DEFINITIONS:
MASTER ACCESS CODE
✦ Allows arming and disarming the Console. Allows access to all programming
options.
RESTRICTED ACCESS CODE
✦ Allows arming and disarming the Console. Allows entering and editing
Restricted Access Codes.
DURESS ACCESS CODE
✦ Allows all options of a Restricted Access Code and causes the Console to
report the duress code to the Central Station if programmed to report.
PAGE ALERT CODE
✦ Allows all options of a Restricted Access Code and causes the Console
to dial the supervisory number (see Section 4.11, Communicator Routing
and Numbers).
USER RESPONSE:
ACCESS CODES
✦ MASTER: When power is fi rst applied to the Console the Master Access Code
is “1234”. Enter any combination of 1 to 5 digits (3 to 5 digits recommended)
for the Master Access Code.
✦ RESTRICTED: Enter any combination of 1 to 5 digits (3 to 5 digits
recommended) for Restricted Access Codes 1-5.
✦ DURESS: Enter any combination of 1 to 5 digits (3 to 5 digits recommended)
for the Duress Code. The Duress Code should be 2 or more digits different
than any other user code to help minimize accidental activation.
✦ PAGE ALERT: Enter any combination of 1 to 5 digits (3 to 5 digits
recommended) for the Page Alert Code.
217473 C - IMAGE 20