LevelOne WBR-6000 - Manual (Page 68)

N_One Wireless Broadband Router
Internal Ports Enter the range of internal port numbers.
Buttons
Defaults This will delete any Servers you have defined, and set the
pre-defined Servers to use their default port numbers.
Disable All This will cause the "Enable" setting of all Virtual Servers to be
set OFF.
Update Selected
Server Update the current Virtual Server entry, using the data shown
in the "Properties" area on screen.
Add as new Serv-
er Add a new entry to the Virtual Server list, using the data
shown in the "Properties" area on screen. The entry selected
in the list is ignored, and has no effect.
Delete Delete the current Virtual Server entry. Note that the pre-
defined Servers can not be deleted. Only Servers you have
defined yourself can be deleted.
Clear Form Clear all data from the "Properties" area, ready for input of a
new Virtual Server entry.
For each entry, the PC must be running the appropri-
ate Server software.
Defining your own Virtual Servers
If the type of Server you wish to use is not listed on the Virtual Servers screen, you
can define and manage your own Servers:
Create a new Server:
1. Click "Clear Form"
2. Enter the required data, as described above.
3. Click "Add".
4. The new Server will now appear in the list.
Modify (Edit) a Server:
1. Select the desired Server from the list
2. Make any desired changes (for example, change the
Enable/Disable setting).
3. Click "Update Selected Server" to save changes to
the selected Server.
Delete a Server:
1. Select the entry from the list.
2. Click "Delete".
Note: You can only delete Servers you have defined.
Pre-defined Server cannot be deleted.
From the Internet, ALL Virtual Servers have the IP
Address allocated by your ISP.
67