LevelOne WBR-6000 User Manual

Page 35

N_One Wireless Broadband Router

Figure 21: TCP/IP Properties (Windows XP)

5. Ensure your TCP/IP settings are correct.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. Using this is recommended. By default, the Wireless
Broadband Router will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the Wireless Broadband
Router.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making
the following changes.
• In

the

Default gateway field, enter the Wireless Broadband Router's IP address

and click OK. Your LAN administrator can advise you of the IP Address they as-
signed to the Wireless Broadband Router.

• If

the

DNS Server fields are empty, select Use the following DNS server ad-

dresses, and enter the DNS address or addresses provided by your ISP, then
click OK.