LevelOne WBR-6000 User Manual

Page 23

N_One Wireless Broadband Router

MAC Filter

There are 3 options:
• Disabled - Select this if you don't want to use Wireless MAC

Filter function.

• Allow - Only the client Listed in the Station can connect to

this Wireless Router .To edit the wireless stations Please
click the "Set Stations".

• Deny - The client listed on the stations can not use the

access point, others can use this access point to access the
internet or LAN.

Set Stations
Button

Click this button to manage the MAC Address control stations.

Draft 802.11n Setting

Bandwidth

Select the desired bandwidth from the drop-down list.

20MHz Only – Single Channel Bandwidth

40MHz Only – Dual-Channel Bandwidth; combine channels

result with high performance.

20MHz/40MHz Auto – Auto Selection, this is the default setting.

Wireless Broadband Router will auto selection depend on the
bandwidth demand.

Please note that selecting 20MHz Only or 40MHz Only might
cause connection problem due to unmatched setting with client
devices. Auto Selection is highly recommended.

Protected
Mode

Select On or Off for protected mode. When Protected Mode is
ON, 802.11n Draft transmission will be treated as first priority.