LG WM3001H*A - Manual (Page 24)

RINSE+SPIN
Select this option to rinse and spin
a load separately from a regular
cycle. This can be helpful in
preventing fresh stains from setting
in fabrics.
To activate the Rinse+Spin cycle:
Press the ON/OFF button to turn on
the washer.
Press the RINSE+SPIN button.
Press the START/PAUSE button.
STEAm
Use the STEAM button to add
steam to the cycle for extra
cleaning power and improved
efficiency. See Steam Cycles
section for additional details.
NOTE: Not all cycles can be used with the
STEAM option.
DELAY WASH
Once you have selected the cycle
and other settings, press this
button to delay the start of the
wash cycle. Each press of the
button increases the delay time by one hour, up
to 19 hours.
CUSTOm Pgm
Use the CUSTOM PGM button
to select the course that you has
been saved by “PGM SAVE”.
SPECIAL FUNCTION BUTTONS
Your Steam Washer™ features several additional
cycle options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
Turn on the washer and turn the cycle
selector knob to select the desired cycle.
Use the cycle setting buttons to adjust the
settings for that cycle.
Press the cycle option button(s) for the
option you would like to add. The cycle
option buttons will light when selected.
Press the START/PAUSE button to start the
cycle. The washer will start automatically.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
1
2
3
4
H O W TO U S E
TUB CLEAN
A buildup of detergent residue
can occur in the wash tub over
time and can lead to a mildewy
or musty smell. The TUB CLEAN
cycle is specially designed to remove this
buildup. The display will show a message to add
liquid bleach to the dispenser. Prewash option
will be selected. After the cycle has ended,
open the door and allow the drum interior to dry
completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
WASH/RINSE OPTImIZER Tm
This function can adjust washing
& rinsing time efficiently with
checking the level of detergent
and degree of hardness.
Excessive detergent amount: rinsing cycle
increase.
Insufficient detergent amount: washing time
increase.
A small amount of remaining detergent
detected, additional rinsing will be added.
PRE-WASH
Adds 16 minutes prewash and a
spin cycle.
1
2
3
1
2
3
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
24