La Crosse Technology WT-2165 - Manual (Page 13)

12
activate the snooze for the time that was
selected in the programming mode. If the
setting is “0”, the alarm will turn off for
24 hours. During the snooze period, the
lower screen will show a countdown until
the alarm will sound again. If the snooze
is activated again during the original
snooze period, the period will be reset.
Once the period is finished, the alarm will
sound again. Pressing any key other than
the snooze will turn off the alarm for 24
hours.
III. OPERATING SCREENS
A. The exact time will always be displayed
in the upper portion of the screen, and the
US map will show when the time zone is
set to the continental US (with the time
zone selected showing in black). The
lower portion of the screen has five
different screens that can be selected. The
default is “DAY, MONTH, DATE” as
shown below.