Linksys RTP300 - Manual (Page 49)

Broadband Router with 2 Phone Ports
41 Chapter 5: Configuring the Router
The Administration Tab - Factory Defaults
The Administration Tab - Factory Defaults
The Factory Defaults screen allows you to reset the Router to its router factory defaults. If you want to reset the
Router to its voice factory defaults, then you need a password available only from your Internet phone service
provider. Contact your provider for more information.
Factory Defaults
Restore Router Factory Defaults. If you wish to reset the Router to its router factory defaults, click the Yes
radio button and then the Save Settings button. Then follow the on-screen instructions.
Restore Voice Factory Defaults. If you click the Yes radio button and then the Save Settings button, you will
see a screen asking for a password. Enter the password provided by your Internet phone service provider, and
follow the on-screen instructions.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.
Figure 5-23: Administration Tab -
Factory Defaults
NOTE: Any custom settings you have saved will be lost when the default settings are restored, so
before you restore the router factory defaults, write down any settings you may need later.