Linksys RTP300 - Manual (Page 24)

Broadband Router with 2 Phone Ports
16 Chapter 5: Configuring the Router
Overview
Setup
• Basic Setup. Enter the Internet connection and network settings on this screen.
• DDNS. Enable the Router’s Dynamic Domain Name System (DDNS) feature on this screen.
• MAC Address Clone. If you need to clone a MAC address onto the Router, use this screen.
• Advanced Routing. On this screen, you can alter firewall, Network Address Translation (NAT), Dynamic
Routing, and Static Routing configurations.
Security
• Firewall. To enable certain types of web filters, use this screen.
• VPN Passthrough. To enable or disable IPSec, PPPoE, and/or PPTP Passthrough, use this screen.
Access Restrictions
• Filter. To block specific users from Internet access, you can set up IP address, port, and MAC address
filtering.
• Device Access Control. Use this screen to control remote access of the Router.